view
'view' 'fill'|'line'|'point' [<value>]|'cl' 'off'|
'edge' [<value>|'off']|'elem' ['off']|'surf'|'volu'|
'front'|'back'|'vec' ['off']|'disp' ['off']|
'bg' ['w'|'k']|'sh' ['off']|'ill' ['off']|'rul' ['off'|<string>]
Command to control the graphic output. This command is intended for batch-mode. See also ”Viewing” for the menu controlled functions.
- ”cl” The command line is shown in the graphic's window.
- ”fill” Element-faces are filled
- ”line” Elements are displayed as fireframes
- ”point” Element-edges are displayed as points with a pixel-width of 'value'
- ”edge” triggers the display of the model edges with a pixel-width of 'value'
- ”elem” triggers the display of the element edges. They are deselected with the additional parameter ”off”.
- ”surf” and ”volu” are used to display the structure either only by it's outer skin (surf) or by drawing all elements (volu).
- ”front” and ”back” define which side of the structure should be drawn. Either the side which faces the user or the back-side. If the back-side is displayed then internal structures are visible.
- ”vec” triggers the vector mode. All vector-entities like displacements are displayed with arrows pointing in the direction of the vector and with a length proportional to the value of the vector. See ”Toggle Vector-Plot” for a detailed description of the equivalent menu-function.
- ”disp” will show the deformed structure based on a formerly selected displacement dataset (no entity must be selected). See ”Toggle Add-Displacement” for a detailed description of the equivalent menu-function.
- ”bg” Without second parameter toggles the background colour. The second parameter 'w' forces white while the parameter 'k' forces black as background colour.
- ”sh” Shaded results are shown. Switched off with ”off”.
- ”ill” Illuminale the backface of the elements. Switched off with ”off”.
- ”rul” triggers the display of a ruler bar. Switched off with ”off”. A string containing the unit can be given: “view rul mm”.